Gibt es eigentlich noch Interessenten dass man vielleicht noch mal eine zweite Sammelbestellung machen kann?
Andreas



Gibt es, zumindest bei SETI.Germany und Planet 3DNow!. Ihr könnt Euch ja auch einfach mal organisieren.Andreas38871 hat geschrieben:Leider war ich beim ersten Schub nicht dabei.
Gibt es eigentlich noch Interessenten dass man vielleicht noch mal eine zweite Sammelbestellung machen kann?
Andreas

Es wurde noch ein Bug im Controller gefunden und beseitigt, und heute geht die erste Hälfte der Detektoren auf Reise, der Rest dann im Lauf der Woche.Message 289 - Posted: 2 Oct 2011 | 13:45:53 UTC
We have found a bug in controller and fix it.
If tests not shows any more bugs we will start sending detectors tomorrow (half of batch) then rest of them during next week.
____________
Regards,
Krzysztof 'krzyszp' Piszczek

Ich versuch mal 'ne Übersetzung, aber noch habe ich die Dinger nicht im Original gesehen, vielleicht muss ich dann noch was ändern:!! WARNING !!
When device is connected to the USB on the right side of the board - from items marked as R22, R23 to the right there is a voltage ~ 400VDC which may be hazardous to your health and even life!
Do not touch the right half of the board during operation!
Since the voltage converter controller is inserted into his socket and the USB connection is plugged in, you take a full responsibility for possible electric shock and/or other injury.
Keep away from small children and pets!
To run the sensor you need:
- a box into which you put the sensor and the GM tube
- two of about 7-10 cm insulated wires with insulated alligator clips
- screwdriver
- USB cable A <-> B (like to the printer/scanner)
For your safety the sensor is supplied with the voltage converter taken out from his socket.
To run the sensor, you must unscrew the display and take it out. Under the display in a black sponge a controller of the voltage converter is placed. It should be put down in the socket on the right side in such a position, that a small dot (circular depression) located on the chassis of controller found on the right side, bottom (with the letters IC3).
Then mount the display back.
The next step is to connect the GM tube which is a part of our radiation detection. Two wires (preferably in different colors or with alligator clips in different colors to distinguish them) must be connected to the blue screw connector marked CON3 (and the words of "GM-Tube"). The end of the tube marked '(+)' to be connected to the cable going to the ends also the marked '+', by analogy with the tip of the tube without any indication to the second cable.
Sensor should be placed in the current non-conductive, preferably a transparent box (so you can see the display) so that the GM tube does not touch the board, and the whole does not move freely inside the box.
Connect the USB cable and have in your mind about not touching the right side of the device!

Ich habe mir erlaubt schon mal den Thread für die deutsche Sammelbestellung zu starten, organisieren sollte das aber einer von denen, die selber eins der Teile haben wollen.Krzystof hat geschrieben:Therefore, the first batch of sensors spread fairly smoothly and we noted no major problems with their operation, we decided to inform you that we are preparing for the next batch.
Over the next two weeks we should start a collection for a series of 100 to 200 pieces of detectors (depending on your interests).
The second series is likely to include special packaging (however, will continue to be necessary to assembly it yourself - it is still a "kit") and will allow the battery power. The price we will try to keep the same, or slightly higher level.
Anyone who planning a group purchase, please contact me via PM.



Kurz zusammengefasst, für die des Englischen nicht ganz so mächtigen:Krzysztof hat geschrieben:As is just after half on January and few of you ask me on PM, when detectors arrive... short rapport.
1. Most parts are already on Kotfryc house (Kotfryc assembly PCB elements this time), we still wait for:
a) trafo's
b) boxes
I have sent today some more parts (arrived to me on Wednesday) by Royal Mail, I don't know how long parcel will be on its way, but I hope it arrived Kotfryc before end of next week.
I have 240 Attiny's to program (10 already done), this will take about a week (as I have other tasks). As soon as PCB's be ready I will send it, I let you know when it's happens.
As we told you before, we will start deliveries before end of this month, I hope we not be late...

Das stelle ich mir recht interessant vorSänger hat geschrieben:Die Professoren werden gerade von Krzysztof programmiert...

Ende nächster Woche werden wir mit dem Versand beginnen, zuerst die, die am längsten dauern werden.Krzysztof hat geschrieben:At the end of next week we plan to start sending detectors for current batch.
Firstly we would like to send to places where delivery takes longest time.
Krzysztof hat geschrieben:Detektorversand - Wie machen wir das?
Weil ich sehr viele PMs und Emails mit immer derselben Frage bekommen habe, denke ich, ich sollte hier unser Vorgehen mal etwas genauer erläutern:
1. Wir versenden die Detektoren in Schüben. Wir (d.h. die Leute, die das Projekt organisieren) können es uns nicht leisten die Kosten für ein paar hundert Detektoren vorzustrecken, daher sammeln wir die Bestellungen auf diese Weise.
2. Wir können nicht nur "ein paar" Detektoren herstellen, die Preise der Einzelteile sind sehr von der Bestellmenge abhängig. Ein einzelner Detektor kostet als Teil eines Schubs ca. 27?, als Einzelbestellung würde er vermutlich ca. 50-70? kosten, wobei ein großer Teil der Einzelpreise die Versandkosten unserer 6 Vorlieferanten sind.
3. Wir machen keinerlei Gewinn mit der Herstellung der Detektoren oder dem Projekt selber, und wir können nicht noch mehr Geld hinein stecken als ohnehin für das Betreiben der Server und die Entwicklung weiterer Prototypen etc. anfällt.
4. Jeder Schub wird bei uns auf der Projektseite angekündigt, üblicherweise ein paar Wochen vor Beginn des Geldeinsammelns.
5. Wir können Euch den Endpreis für den nächsten Schub nicht vorab sagen, und zwar aus folgenden zwei Gründen:
a) Die Kosten in Euro schwanken zu stark für eine Vorhersage der Kosten in 2 Monaten.
b) Wir möchten gerne ein neues Stromversorgungsmodul an den nächsten Schub anbauen, nicht länger unsere selbst gebautes Teil. Das kann, muss aber nicht, den Preis beeinflussen, wir wissen es schlicht noch nicht.
Ich hoffe hiermit die meisten Fragen über Bestellungen beantwortet zu haben. Solltet Ihr noch mehr Fragen haben, stellt diese bitte in unserem Forum.

