error - exit code 195 (0xc3) on CMSearch
-
Matthias Lehmkuhl
- Prozessor-Polier

- Beiträge: 125
- Registriert: 12.03.2008 20:42
Re: error - exit code 195 (0xc3) on CMSearch
found another page
http://stackoverflow.com/questions/5868 ... -os-switch
...
Basically the IMAGE_FILE_LARGE_ADDRESS_AWARE tells the system, "I know that addresses with the high bit set are not negative, and can handle them". If the system is prepared to provide user mode addresses above 2GB, then it will. If the system is not prepared to give those addresses (ie., a 32-bit Windows OS without the /3GB setting), the process can't get those addresses anyway - but no harm done.
...
http://stackoverflow.com/questions/5868 ... -os-switch
...
Basically the IMAGE_FILE_LARGE_ADDRESS_AWARE tells the system, "I know that addresses with the high bit set are not negative, and can handle them". If the system is prepared to provide user mode addresses above 2GB, then it will. If the system is not prepared to give those addresses (ie., a 32-bit Windows OS without the /3GB setting), the process can't get those addresses anyway - but no harm done.
...
Matthias
- 
- 
-
Ananas
- WU-Schieber

- Beiträge: 1184
- Registriert: 27.04.2008 18:37
- Wohnort: Nordlichter Köln
Re: error - exit code 195 (0xc3) on CMSearch
I sent Yoyo the latest version of the cpu specific unzipper for Linux again, he had an old one that didn't work properly yet. I also sent him the binaries for windows with this "aware" bit set.
vi BOINC/checkin_notes
:1,$s/bug/feature/g
:wq!
Erzaehlen sich Biologen eigentlich Klein-RNA-Witze?
:1,$s/bug/feature/g
:wq!
Erzaehlen sich Biologen eigentlich Klein-RNA-Witze?
-
Ananas
- WU-Schieber

- Beiträge: 1184
- Registriert: 27.04.2008 18:37
- Wohnort: Nordlichter Köln
Re: error - exit code 195 (0xc3) on CMSearch
Oops, sorry, yes, ssse3 is mapped to the sse3 version.cisf hat geschrieben:i think u wanted to say sse3 ( ssse3 on cpu list ) - cmsearch sse3 got properly extracted it seems ...Ananas hat geschrieben:(in this case an SSE2 box)
Strange that yours extracted the non-sse version, I do not really understand that but it might have been caused by the oldish unzip_cpufeat program :-/
I tested your CPU flags string with the current version and it does recognize sse2 for that. Thanks
vi BOINC/checkin_notes
:1,$s/bug/feature/g
:wq!
Erzaehlen sich Biologen eigentlich Klein-RNA-Witze?
:1,$s/bug/feature/g
:wq!
Erzaehlen sich Biologen eigentlich Klein-RNA-Witze?
-
Conan
- XBOX360-Installer

- Beiträge: 80
- Registriert: 11.02.2010 11:09
Re: error - exit code 195 (0xc3) on CMSearch
I am also getting these "Exit 195" Errors,
My machine in an AMD Phenom II X4 955 with 4 GB of RAM
The failed work units are Norway-Rat, Cattle and Horse
See 1296163
1297525
1297600
1298341
1299846
1300238
1301034
I have not been checking memory usage as I did not realize that I had any errors since these are the first ones I have had (I think), will check the next few.
Up to 3 and 4 RNA World WUs were running at the same time, along with QuantumFire, Collatz(GPU) and AQUA (waiting to run as needs 4 cores).
Thanks
Conan.
[EDIT:-- Just checked and found that I have 3 RNA work units started but waiting to run due to AQUA running at the moment, they are taking 186 MB, 1 GB and 1.1 GB of RAM as I leave them in memory.
So 2.3 GB of RAM is locked up to RNA and this will most likely increase as the 186 MB WU has only just started.
My machine in an AMD Phenom II X4 955 with 4 GB of RAM
The failed work units are Norway-Rat, Cattle and Horse
See 1296163
1297525
1297600
1298341
1299846
1300238
1301034
I have not been checking memory usage as I did not realize that I had any errors since these are the first ones I have had (I think), will check the next few.
Up to 3 and 4 RNA World WUs were running at the same time, along with QuantumFire, Collatz(GPU) and AQUA (waiting to run as needs 4 cores).
Thanks
Conan.
[EDIT:-- Just checked and found that I have 3 RNA work units started but waiting to run due to AQUA running at the moment, they are taking 186 MB, 1 GB and 1.1 GB of RAM as I leave them in memory.
So 2.3 GB of RAM is locked up to RNA and this will most likely increase as the 186 MB WU has only just started.
-
MonsieurPoot
Re: error - exit code 195 (0xc3) on CMSearch
Those WUs are among the ones with the highest memory needs I have encountered so far on a similar system. I usually try to let only one of those run at a time along with a few of the smaller/shorter RNA WUs or some completely different project with low RAM requirements.Conan hat geschrieben:The failed work units are Norway-Rat, Cattle and Horse.
Then again: Some major CMS WUs may need more that 4GB memory all for themselves and thus will not complete on your system (or mine, for that matter) at all. Taken into account how many other machines failed computing the workunits you linked to in your post, they just might be among those "uber-wus".
-
rilian
- PDA-Benutzer

- Beiträge: 47
- Registriert: 08.02.2010 15:38
Re: error - exit code 195 (0xc3) on CMSearch
<offtopic>
now server replies "cmsearch needs 1907.35 MB RAM but only XXXX MB is available for use".
Let's we have a machine with 3GB RAM and 2 cores, and attached to RNA-only.
on first request BOINC will get one WU, as it has free ram. On the next request (as we have a free core) will it get another WU or not ?
</offtopic>
now server replies "cmsearch needs 1907.35 MB RAM but only XXXX MB is available for use".
Let's we have a machine with 3GB RAM and 2 cores, and attached to RNA-only.
on first request BOINC will get one WU, as it has free ram. On the next request (as we have a free core) will it get another WU or not ?
</offtopic>
I crunch for Ukraine
-
Michael H.W. Weber
- Vereinsvorstand

- Beiträge: 23174
- Registriert: 07.01.2002 01:00
- Wohnort: Marpurk
Re: error - exit code 195 (0xc3) on CMSearch
The machines with CMS problems, are these exclusively 32-bit systems or even 64-bit machines?
Michael.
Michael.
Fördern, kooperieren und konstruieren statt fordern, konkurrieren und konsumieren.


-
rilian
- PDA-Benutzer

- Beiträge: 47
- Registriert: 08.02.2010 15:38
Re: error - exit code 195 (0xc3) on CMSearch
I had not any error on 64-bit/2GB ram/4 cores machineMichael H.W. Weber hat geschrieben:The machines with CMS problems, are these exclusively 32-bit systems or even 64-bit machines?
Michael.
but you can query database, like
SELECT count(*) FROM computers_table
WHERE computer_id IN
(SELECT computer_id FROM tasks_table WHERE status="error" AND exit_status LIKE "195%")
AND operating_system LIKE "%64%"
I crunch for Ukraine
-
nenym
- Taschenrechner

- Beiträge: 14
- Registriert: 09.03.2010 22:58
- Wohnort: Brno, CZ
Re: error - exit code 195 (0xc3) on CMSearch
As I have posted, I had great problems with super CMS (cca 7GB RAM top load of one task) crunched on WinXp x_64 (4 CPU Xeon, 8GB RAM +2GB RAM swap). After I have set swap to 12GB (thanx to Matthias Lehmkuhl), no problem occurred, but I haven't got such a great task as I had previously.Michael H.W. Weber hat geschrieben:The machines with CMS problems, are these exclusively 32-bit systems or even 64-bit machines?
Michael.
-
Michael H.W. Weber
- Vereinsvorstand

- Beiträge: 23174
- Registriert: 07.01.2002 01:00
- Wohnort: Marpurk
Re: error - exit code 195 (0xc3) on CMSearch
Ok, thank you for the information. 
Michael.
Michael.
Fördern, kooperieren und konstruieren statt fordern, konkurrieren und konsumieren.


-
Conan
- XBOX360-Installer

- Beiträge: 80
- Registriert: 11.02.2010 11:09
-
Michael H.W. Weber
- Vereinsvorstand

- Beiträge: 23174
- Registriert: 07.01.2002 01:00
- Wohnort: Marpurk