Message cmcalibrate is not available for ur type of computer
-
RvP_LaN
- Idle-Sammler

- Beiträge: 3
- Registriert: 18.02.2010 03:36
Message cmcalibrate is not available for ur type of computer
Hi,
Most of my boxes are under 64bits system, either Linux or XP64.
I received this message (title) for all Linux boxes, which run on AMD x86_64 CPU.
On the "Applications" page of the site, we can read that CMcalibrate runs on plateforms Linux AMD x86_64 or Intel EM64T CPU. OK, that's the case. So why no WU is sent to these Linux boxes? Do they miss some other hardware requirements?
Thanx. Regards.
Most of my boxes are under 64bits system, either Linux or XP64.
I received this message (title) for all Linux boxes, which run on AMD x86_64 CPU.
On the "Applications" page of the site, we can read that CMcalibrate runs on plateforms Linux AMD x86_64 or Intel EM64T CPU. OK, that's the case. So why no WU is sent to these Linux boxes? Do they miss some other hardware requirements?
Thanx. Regards.
-
Michael H.W. Weber
- Vereinsvorstand

- Beiträge: 23174
- Registriert: 07.01.2002 01:00
- Wohnort: Marpurk
Re: Message cmcalibrate is not available for ur type of computer
Yes, as all projects have certain hardware requirements in case of RNA World it might be possible that these machines have too little RAM. Maybe you can givve a few specs of thise boxes (i.e. RAM & number of CPU cores)?
Michael.
Michael.
Fördern, kooperieren und konstruieren statt fordern, konkurrieren und konsumieren.


-
[Af>Linux] Dudumomo
- Fingerzähler

- Beiträge: 2
- Registriert: 18.02.2010 09:15
Re: Message cmcalibrate is not available for ur type of computer
Oh may be that's why I can't get any WU on my Gentoo 64 - Quad core (Q8200 + 2gb only) 
-
yoyo
- Vereinsvorstand

- Beiträge: 8170
- Registriert: 17.12.2002 14:09
- Wohnort: Berlin
Re: Message cmcalibrate is not available for ur type of computer
Hello,
we are using Homogenous Redundancy for cmcalibrate. Means if one result is assigned to a system, the second one must go to an identical system as well. Therfore it is possible that you do not get wus, even if some are available. They just must be finished by a different hardware.
Read also this FAQ entry for this.
yoyo
we are using Homogenous Redundancy for cmcalibrate. Means if one result is assigned to a system, the second one must go to an identical system as well. Therfore it is possible that you do not get wus, even if some are available. They just must be finished by a different hardware.
Read also this FAQ entry for this.
yoyo
-
Matthias Lehmkuhl
- Prozessor-Polier

- Beiträge: 125
- Registriert: 12.03.2008 20:42
Re: Message cmcalibrate is not available for ur type of computer
My Kubuntu x64 (EM64T) does also get no new Work
Memory: 2261.96 MB (copied from host page)
hostid=1957
I have only one CPU on this host, so the host is above of the requirements: "some of these WUs with RAM requirements above 1.5 GB per WU"
for other projects the host is active as a x64/EM64T computer
If I select
Run only the selected applications
upperCASE: no
cmsearch: yes
cmcalibrate: yes
then I get the messages from server:
No work send
No work is available for cmsearch
If I select
Run only the selected applications
upperCASE: no
cmsearch: no
cmcalibrate: yes
then I get the message from server:
No work send
Memory: 2261.96 MB (copied from host page)
hostid=1957
I have only one CPU on this host, so the host is above of the requirements: "some of these WUs with RAM requirements above 1.5 GB per WU"
for other projects the host is active as a x64/EM64T computer
If I select
Run only the selected applications
upperCASE: no
cmsearch: yes
cmcalibrate: yes
then I get the messages from server:
No work send
No work is available for cmsearch
If I select
Run only the selected applications
upperCASE: no
cmsearch: no
cmcalibrate: yes
then I get the message from server:
No work send
Matthias
- 
- 
-
Michael H.W. Weber
- Vereinsvorstand

- Beiträge: 23174
- Registriert: 07.01.2002 01:00
- Wohnort: Marpurk
Re: Message cmcalibrate is not available for ur type of computer
Yes, it is possible that the WUs still in the pipeline have these 1500+ MB RAM requirements and that your machine does not have enough RAM for WU delivery. Note that your OS and BOINC also require memory. It is a dual core machine as I see, so I am not sure how exactly BOINC does the memory requirement calculations. If it always wants to serve both cores and if RNA World has only high RAM requiring WUs left on the server for delivery, than 2 GB is certainly to little. But Yoyo will know more on this. 
Michael.
Michael.
Fördern, kooperieren und konstruieren statt fordern, konkurrieren und konsumieren.


-
yoyo
- Vereinsvorstand

- Beiträge: 8170
- Registriert: 17.12.2002 14:09
- Wohnort: Berlin
Re: Message cmcalibrate is not available for ur type of computer
On download Boinc checks if the free memory on your system is bigger than the requirement of the wu. This check is also done on WU start and periodic during WU run.
yoyo
yoyo
-
L3v3l0rd
Re: Message cmcalibrate is not available for ur type of computer
And Boinc checks the limits you set up in the disk and memory usage in your general preferences of Boinc.yoyo hat geschrieben:On download Boinc checks if the free memory on your system is bigger than the requirement of the wu.
See:
Code: Alles auswählen
Disk and memory usage
Usage limits
You can limit the disk space used by BOINC in any of three ways:
1. Maximum disk space used by BOINC
2. Maximum percentage of total space that can be used by BOINC
3. Minimum disk space to keep free. The Default is 10.0 GB
Access interval
A suggested interval between disk accesses. Useful on laptops where the disk may be spun down for long periods. Default is 60 seconds, maximum 999 seconds
Use at most X% of page file
Maximum percentage of your virtual memory page file (also called 'swap space') used by BOINC. The Default is 75%.
Use at most X% of memory when computer is in use
Limits the amount of RAM used by BOINC applications when your computer is in use (i.e. when there has been recent mouse or keyboard activity). Setting this to a low value lets you run BOINC all the time without impacting your computer's performance. The Default is 50%.
Use at most X% of memory when computer is idle
Limits the amount of RAM used by BOINC applications when your computer is not in use. The Default is 90%. So you also have to check what limits you set there.
Greetings, L3v3l
-
RvP_LaN
- Idle-Sammler

- Beiträge: 3
- Registriert: 18.02.2010 03:36
Re: Message cmcalibrate is not available for ur type of computer
Hi. OK. That's what about I was afraid of: On the the news page of RNA, it is said that for multi core machines, we could potentially need 1.5Go PER CORE!!!Michael H.W. Weber hat geschrieben:Yes, as all projects have certain hardware requirements in case of RNA World it might be possible that these machines have too little RAM. Maybe you can givve a few specs of thise boxes (i.e. RAM & number of CPU cores)?
My boxes are mostly Quad Cores with 2Go RAM... Unless we are able to tell Boinc's core client settings that for RNA World, it should use only one core at a time, I will never get a WU!
May be you could transform this greedy hardware need by sending multi-cores WUs? (like AQUA did/do) In this manner, it will be more raisonnable to have ONE WU, multi-cores and ONE set of 1.5Go? Does this make sense for your project?
Otherwise I don't feel very comfortable to support this kind of greedy or "elitist" project! (None offense, I always become the grumpy granpa' when I talk like this! But) I estimate that Boinc's projects should address the largest possible population!!! Dual Cores with 1Go RAM are quite common machines these days, but Quad Cores with 8Go RAM machines are reserved for servers or graphical render machines! I'm not sure that admins will let Boinc run on such costly hardwares. So may be you will have to cooldown your hardware requirements...
Regards
-
Michael H.W. Weber
- Vereinsvorstand

- Beiträge: 23174
- Registriert: 07.01.2002 01:00
- Wohnort: Marpurk
Re: Message cmcalibrate is not available for ur type of computer
Maybe a few explanatory points. First of all, this project is demanding more in e.g. terms of RAM than maybe others, because it is just an intrinsic requirement to do the work we are doing.
We just have to work with huge data sets here and there are complex calculations underlying this project which is usually exclusively run on a high performance cluster. I can assure you, that I would love to have our tasks use much, much less RAM but this just isn't possible.
Concerning your suggestion of a MT application, please see this FAQ section. So, in essence we are on it.
Michael.
P.S.: May I ask what OS is running on your machine?
Concerning your suggestion of a MT application, please see this FAQ section. So, in essence we are on it.
Michael.
P.S.: May I ask what OS is running on your machine?
Fördern, kooperieren und konstruieren statt fordern, konkurrieren und konsumieren.


-
MonsieurPoot
Re: Message cmcalibrate is not available for ur type of computer
Actually this should be possible, using an "app_info.xml"-configuration file for the specific application.RvP_LaN hat geschrieben:My boxes are mostly Quad Cores with 2Go RAM... Unless we are able to tell Boinc's core client settings that for RNA World, it should use only one core at a time, I will never get a WU!
I do not have a clue as how to do it, though, but I guess there should be enough canny people in the official BOINC-forum to help you along:
http://boinc.berkeley.edu/dev/
- Poot
-
RvP_LaN
- Idle-Sammler

- Beiträge: 3
- Registriert: 18.02.2010 03:36
Re: Message cmcalibrate is not available for ur type of computer
OK! I was just hoping that, specifically, coming from a cluster world, it was possible to divide more and more the project into sub-tasks that consume each less memory.Michael H.W. Weber hat geschrieben:I can assure you, that I would love to have our tasks use much, much less RAM but this just isn't possible.
Wonderful! I'll wait for it!Concerning your suggestion of a MT application ... in essence we are on it.
Yes. My boxes are mostly under Linux OpenSuse 64bits, and have a few Windows boxes, mostly under XP64.P.S.: May I ask what OS is running on your machine?
Thanx for the explanations.
Regards.