PrimeGrid: Year of the Pig Challenge

Hier findest Du alles zur Organisation, Durchführung und den Resultaten unserer Wettkämpfe, Challenges und Races
Nachricht
Autor
Benutzeravatar
gemini8
Vereinsvorstand
Vereinsvorstand
Beiträge: 5898
Registriert: 31.05.2011 10:30
Wohnort: Hannover

PrimeGrid: Year of the Pig Challenge

#1 Ungelesener Beitrag von gemini8 » 03.03.2019 04:35

Willkommen zum Wettbewerb anläßlich des Jahres des Schwein.

Dieser zweite der 2019er Wettbewerbe läuft fünf Tage, um das Jahr des Schweines zu feiern. Gerechnet wird die Generalized Cullen/Woodall Prime Search (LLR) Applikation.

Um teilzunehmen, wählt nur das Generalized Cullen/Woodall Prime Search LLR (GCW) Subprojekt in den PrimeGrid Einstellungen aus. Der Wettbewerb wird am 5. März 2019, 18:00 UTC beginnen und am 10. März 2019, 18:00 UTC enden. Gewertet werden ausschließlich Aufgaben, die während dieses Zeitraumes gezogen UND abgegeben wurden. Vor dem Wettbewerb zu bunkern, hat keinerlei positiven Effekt.

Applikationen gibt es für Linux 32 und 64 Bit, Windows 32 und 64 Bit sowie MacIntel.
CPUs, deren Befehlssatz AVX enthält, sind sinnvoll, und solche, deren Befehlssatz FMA3 enthält, dürften die besten Ergebnisse liefern.

LLR ist CPU-intensiv, stromhungrig und erzeugt viel Abwärme. Sorgt für ausreichende Kühlung eurer Rechner!

Es ist möglich, GCW mit Multi-Threading zu rechnen.
Ergänzt eure app_config.xml Datei (unter Windows typischerweise im Verzeichnis C:\ProgramData\BOINC\projects\www.primegrid.com\ ) mit den folgenden Zeilen bzw. legt sie bei Nichtvorhandensein selbst an:

Code: Alles auswählen

<app_config>
   <app>
      <name>llrGCW</name>
      <fraction_done_exact/>
   </app>
   <app_version>
       <app_name>llrGCW</app_name>
       <cmdline>-t 4</cmdline>
       <avg_ncpus>4</avg_ncpus>
   </app_version>
</app_config>
Dies Beispiel ist für vier belegte Cores (avg_ncpus) und vier genutzte Threads (cmdline). Solltet ihr andere Präferenzen haben, verändert den entsprechenden Wert.

Ich möchte wieder darauf hinweisen, daß es besonders für Kleincruncher, die nicht auf einen Platz in den vorderen 300 Rängen hoffen dürfen, attraktiv sein könnte, auf unseren Cluster-Account zu rechnen, um diesen nach oben zu pushen. Die derart errechneten Credits gehen in die Individualwertung des Cluster-Accounts sowie in die Teamwertung ein, nicht aber in eure eigene Individualwertung. Diese Credits verbleiben auch nach dem Wettbewerb beim Cluster-Account.

So rechnet ihr auf den Cluster-Account:
Um den schwachen Kontoschlüssel auf einem Computer zu verwenden, findet oder erstellt die 'Kontodatei' für dieses Projekt. Die Kontodatei für PrimeGrid ist account_www.primegrid.com.xml .
Als Inhalt tragt bitte Folgendes ein:

Code: Alles auswählen

<account>
    <master_url>www.primegrid.com</master_url>
    <authenticator>50088_a5854c4348d36141c50e1e4493bba7da</authenticator>
</account>
Speichern, Boinc neu starten, fertig.

Bitte brecht am Ende des Wettkampes alles ab, was ihr nicht weiter berechnen möchtet.
Pausiert nicht die Aufgaben bzw. das Projekt, entfernt nicht das Projekt von euren Rechnern, und setzt es nicht einfach zurück. Schaltet eure Wettkampf-Rechner auch nicht einfach aus, oder beendet Boinc mit unfertigen Aufgaben, die dann auf der Festplatte vergammeln.
Nur durch das Abbrechen von unfertigen Aufgaben können diese möglichst bald neu ausgegeben und zeitnah berechnet werden, um das endgültige Ergebnis des Wettkampfes festzustellen.

Die Übersetzung bzw. Übertragung von Auszügen des untenstehenden, zuerst im PrimeGrid-Forum bekanntgemachten Textes wurde von mir nach bestem Wissen und Gewissen vorgenommen.
Auslassungen und Zusätze stammen ebenfalls aus meiner virtuellen Feder.
Welcome to the Year of the Pig Challenge

2019 is a Year of the Pig. In Chinese astrology, each year is related to a Chinese zodiac animal according to the 12-year cycle. The cycle of twelve corresponds to the twelve-year cycle of Jupiter. There are five types of Pigs, named after the Chinese elements. In order, they are: Metal, Water, Wood, Fire, and Earth. 2019 is an Earth Pig Year, starting on 5th February 2019 and ending on 24th January 2020. Earth Pigs are Communicative, popular among their friends, with a strong sense of time keeping. Famous Earth Pigs include Henry Ford and Arnold Schwarzenegger.

The second Challenge of the 2019 Challenge series is a 5 day challenge to celebrate the Year of the Pig. The challenge is being offered on the Generalized Cullen/Woodall Prime Search (LLR) application.

To participate in the Challenge, please select only the Generalized Cullen/Woodall Prime Search LLR (GCW) project in your PrimeGrid preferences section. The challenge will begin 5th March 2019 18:00 UTC and end at 10th March 2019 18:00 UTC.

Application builds are available for Linux 32 and 64 bit, Windows 32 and 64 bit and MacIntel. Intel CPUs with AVX capabilities (Sandy Bridge, Ivy Bridge, Haswell, Broadwell, Skylake, Kaby Lake, Coffee Lake) will have a very large advantage, and Intel CPUs with FMA3 (Haswell, Broadwell, Skylake, Kaby Lake, Coffee Lake) will be the fastest.

ATTENTION: The primality program LLR is CPU intensive; so, it is vital to have a stable system with good cooling. It does not tolerate "even the slightest of errors." Please see this post for more details on how you can "stress test" your computer. Tasks on one CPU core will take ~2 days on fast/newer computers and 10+ days on slower/older computers. If your computer is highly overclocked, please consider "stress testing" it. Sieving is an excellent alternative for computers that are not able to LLR. :)

Highly overclocked Haswell, Broadwell, Skylake, Kaby Lake or Coffee Lake (i.e., Intel Core i7, i5, and i3 -4xxx or better) computers running the application will see fastest times. Note that GCW is running the latest FMA3 version of LLR which takes full advantage of the features of these newer CPUs. It's faster than the previous LLR app and draws more power and produces more heat. If you have a Haswell, Broadwell, Skylake, Kaby Lake or Coffee Lake CPU, especially if it's overclocked or has overclocked memory, and haven't run the new FMA3 LLR before, we strongly suggest running it before the challenge while you are monitoring the temperatures.

Please, please, please make sure your machines are up to the task.


Multi-threading optimisation instructions

Those looking to maximise their computer's performance during this challenge, or when running LLR in general, may find this information useful.
  • * Your mileage may vary. Before the challenge starts, take some time and experiment and see what works best on your computer.
    * If you have an Intel CPU with hyperthreading, either turn off the hyperthreading in the BIOS, or set BOINC to use 50% of the processors.
    • *If you're using a GPU for other tasks, it may be beneficial to leave hyperthreading on in the BIOS and instead tell BOINC to use 50% of the CPU's. This will allow one of the hyperthreads to service the GPU.
    * Use LLR's multithreaded mode. It requires a little bit of setup, but it's worth the effort. Follow these steps:
    • * Create a app_config.xml file in the directory C:\ProgramData\BOINC\projects\www.primegrid.com\ (or wherever your BOINC data directory is located). For a quad core CPU, the file should contain the following contents. Change the two occurrences of "4" to the number of actual cores your computer has.

      [pre]<app_config>
      <app>
      <name>llrGCW</name>
      <fraction_done_exact/>
      </app>
      <app_version>
      <app_name>llrGCW</app_name>
      <cmdline>-t 4</cmdline>
      <avg_ncpus>4</avg_ncpus>
      </app_version>
      </app_config>[/pre]
      * After creating the file, click on "Options/Read config files". You should then restart BOINC or reboot.
      * The first time BOINC downloads an GCW task, it may act a little strange and download 4 tasks instead of 1. The run times on this first set of tasks may look a bit strange too. This is normal. This will also occur anytime BOINC downloads more than one task at a time. This can be avoided by setting "Use at most [ 1 ] % of the CPUs" before you download GCW tasks. After one task was downloaded, increase the percentage.
      * Some people have observed that when using multithreaded LLR, hyperthreading is actually beneficial. We encourage you to experiment and see what works best for you.
Time zone converter:

The World Clock - Time Zone Converter

NOTE: The countdown clock on the front page uses the host computer time. Therefore, if your computer time is off, so will the countdown clock. For precise timing, use the UTC Time in the data section at the very top, above the countdown clock.

Scoring Information

Scores will be kept for individuals and teams. Only tasks issued AFTER 5th March 2019 18:00 UTC and received BEFORE 10th March 2019 18:00 UTC will be considered for credit. We will be using the same scoring method as we currently use for BOINC credits. A quorum of 2 is NOT needed to award Challenge score - i.e. no double checker. Therefore, each returned result will earn a Challenge score. Please note that if the result is eventually declared invalid, the score will be removed.


At the Conclusion of the Challenge
  • We kindly ask users "moving on" to ABORT their tasks instead of DETACHING, RESETTING, or PAUSING.

    ABORTING tasks allows them to be recycled immediately; thus a much faster "clean up" to the end of an LLR Challenge. DETACHING, RESETTING, and PAUSING tasks causes them to remain in limbo until they EXPIRE. Therefore, we must wait until tasks expire to send them out to be completed.

    Please consider either completing what's in the queue or ABORTING them. Thank you. :)
About the Generalized Cullen/Woodall Prime Search

A Cullen number (first studied by Reverend James Cullen in 1905) is a number of the form n * 2^n + 1. A Woodall number (first studied by Allan Cunningham and H.J. Woodall in 1917) is a number of the form n * 2^n - 1.

Generalized Cullen and Woodall numbers are of the form n * b^n + 1 and n * b^n - 1, respectively, where n + 2 > b.

A couple of years ago PrimeGrid moved its search for Generalized Cullen and Generalized Woodall primes from PRPNet to BOINC. A double-check of all ranges searched by PRPNet has been completed by PrimeGrid, and is continuing on with new work running multiple bases (b values) concurrently and incrementing through n values.

PrimeGrid is sieving to a much larger n than has been previously done. The largest candidates will be in excess of 15,000,000 digits, and will be the same size as the largest candidates in the Seventeen or Bust project.

Once PrimeGrid finds a Generalized Cullen or Woodall on a base, it stops looking for Generalized Cullen or Woodall primes on that base, depending on the type found. For all the current bases, PrimeGrid will initially be searching only for Generalized Cullen Primes. For detail about the bases PrimeGrid will be searching (and has searched), you can go here: http://www.primegrid.com/forum_thread.p ... true#30718.

In addition to having found the largest known Cullen prime http://primes.utm.edu/primes/page.php?id=89536 and largest known Woodall prime http://primes.utm.edu/primes/page.php?id=124539, PrimeGrid has found the largest known Generalized Cullen prime, http://primes.utm.edu/primes/page.php?id=124515 and the 4th largest known Generalized Woodall prime http://primes.utm.edu/primes/page.php?id=98862.

For more information on Generalized Cullen and Woodall Numbers, you can go here: http://primes.utm.edu/top20/page.php?id=42 and here: http://primes.utm.edu/top20/page.php?id=45.

What is LLR?

The Lucas-Lehmer-Riesel (LLR) test is a primality test for numbers of the form N = k*2^n − 1, with 2^n > k. Also, LLR is a program developed by Jean Penne that can run the LLR-tests. It includes the Proth test to perform +1 tests and PRP to test non base 2 numbers. See also: (Edouard Lucas: 1842-1891, Derrick H. Lehmer: 1905-1991, Hans Riesel: 1929-2014).
Gruß, Jens
- - - - - -
Lowend-User und Teilzeit-Cruncher

Bild Bild Bild
Bild

Benutzeravatar
Kolossus
TuX-omane
TuX-omane
Beiträge: 4277
Registriert: 26.10.2014 14:51

Re: PrimeGrid: Year of the Pig Challenge

#2 Ungelesener Beitrag von Kolossus » 03.03.2019 09:27

Na, dann bin ich mal dabei. Schweine mag ich, besonders als Schnitzel.......
Gruß Harald

Bild

Benutzeravatar
Kolossus
TuX-omane
TuX-omane
Beiträge: 4277
Registriert: 26.10.2014 14:51

Re: PrimeGrid: Year of the Pig Challenge

#3 Ungelesener Beitrag von Kolossus » 03.03.2019 10:04

EDIT: Beitrag gelöscht, Fehler lag bei mir. Sorry
Gruß Harald

Bild

Benutzeravatar
gemini8
Vereinsvorstand
Vereinsvorstand
Beiträge: 5898
Registriert: 31.05.2011 10:30
Wohnort: Hannover

Re: PrimeGrid: Year of the Pig Challenge

#4 Ungelesener Beitrag von gemini8 » 03.03.2019 10:42

Das ist meine, mit der sämtliche LLR-Projekte zzgl. Genefer-21 abgedeckt sein sollten:

Code: Alles auswählen

<app_config>
<project_max_concurrent>2</project_max_concurrent>
<app>
   <name>llrTPS</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrTPS</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrWOO</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrWOO</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrCUL</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrCUL</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrPPS</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrPPS</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrSOB</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrSOB</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrTRP</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrTRP</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrPPSE</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrPPSE</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrSR5</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrSR5</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrESP</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrESP</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrMEGA</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrMEGA</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrPSP</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrPSP</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llrGCW</name>
      <fraction_done_exact/>
      <max_concurrent>1</max_concurrent>
</app>
   <app_version>
      <app_name>llrGCW</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>llr321</name>
      <max_concurrent>1</max_concurrent>
      <fraction_done_exact/>
</app>
   <app_version>
      <app_name>llr321</app_name>
      <cmdline>-t 2</cmdline>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
<app>
   <name>genefer</name>
      <max_concurrent>1</max_concurrent>
      <fraction_done_exact/>
</app>
   <app_version>
      <app_name>genefer</app_name>
      <cmdline>-nt 2</cmdline>
      <plan_class>cpuGFN21</plan_class>
      <avg_ncpus>2</avg_ncpus>
   </app_version>
</app_config>
Die Einstellung ist für zwei Kerne, zwei Threads.
max_concurrent läßt eine Aufgabe pro Subprojekt zu.
max_concurrent steht auf 2, damit neben dem CPU-Projekt noch eine GPU-Aufgabe laufen kann.
Gruß, Jens
- - - - - -
Lowend-User und Teilzeit-Cruncher

Bild Bild Bild
Bild

Benutzeravatar
Kolossus
TuX-omane
TuX-omane
Beiträge: 4277
Registriert: 26.10.2014 14:51

Re: PrimeGrid: Year of the Pig Challenge

#5 Ungelesener Beitrag von Kolossus » 03.03.2019 11:21

Ich glaube, der Widerwillen zu Primegrid beruht auf Gegenseitigkeit. Sobald ich versuche, einer WU mehr als einen Kern zuzuweisen, geht es zu 100 % schief. Wenn dann auch noch fehlerhafte configs herausgegeben werden, ist die Bruchlandung ja vorprogrammiert. Ich denke, ich lasse in Zukunft einfach Primegrid sein und gut isset
Gruß Harald

Bild

Benutzeravatar
compalex
WU-Schieber
WU-Schieber
Beiträge: 1112
Registriert: 13.12.2016 17:54
Wohnort: Hockenheim

Re: PrimeGrid: Year of the Pig Challenge

#6 Ungelesener Beitrag von compalex » 04.03.2019 14:45

rechne auch paar llrGCW mit
Gruß, Alex

Der Schlaue sucht nach einer Lösung, der dumme einen Schuldigen.

#1 Ryzen 3900X + RTX 4070 #2 Ryzen 3900X + GTX 1080
Bild

Benutzeravatar
Yeti
Oberprojektler
Oberprojektler
Beiträge: 1917
Registriert: 01.04.2008 21:15
Kontaktdaten:

Re: PrimeGrid: Year of the Pig Challenge

#7 Ungelesener Beitrag von Yeti » 04.03.2019 14:48

Da es ein CPU-Race ist, werde ich es mir nur von der Seitenlinie anschauen :wink:
Bild

Supporting BOINC, a great concept !

Benutzeravatar
Kolossus
TuX-omane
TuX-omane
Beiträge: 4277
Registriert: 26.10.2014 14:51

Re: PrimeGrid: Year of the Pig Challenge

#8 Ungelesener Beitrag von Kolossus » 04.03.2019 16:51

Schade, Yeti
Gruß Harald

Bild

Benutzeravatar
compalex
WU-Schieber
WU-Schieber
Beiträge: 1112
Registriert: 13.12.2016 17:54
Wohnort: Hockenheim

Re: PrimeGrid: Year of the Pig Challenge

#9 Ungelesener Beitrag von compalex » 04.03.2019 17:57

Auf einem i5-6500 brauche ich für 3 Single WU ca. 22 Std. im MT-Mode (also 3Core auf eine WU) braucht die CPU 8Std. d.h. (8x3=24Std.) Im Single Mode gibt es mehr WU/Zeit. Da aber das race nur 5 Tage dauert. Werde ich am Donnerstag oder Freitag auf MT umstellen.
Auf den Ryzen teste ich gleich noch den singelcore vs MT lauf. Bin gespannt und werde wenn gewollt berichten.
@Yeti, wenn du doch mal Lust am race bekommst, kannst ja auf jedem i7 nur eine oder 2 WU rechnen, das Arbeiten bleibt Flüssig bis 3Core. Office Arbeiten gehen natürlich auch mit Vollast (das wären aber bei der i7-4770 auch max. 4core)
Gruß, Alex

Der Schlaue sucht nach einer Lösung, der dumme einen Schuldigen.

#1 Ryzen 3900X + RTX 4070 #2 Ryzen 3900X + GTX 1080
Bild

Benutzeravatar
gemini8
Vereinsvorstand
Vereinsvorstand
Beiträge: 5898
Registriert: 31.05.2011 10:30
Wohnort: Hannover

Re: PrimeGrid: Year of the Pig Challenge

#10 Ungelesener Beitrag von gemini8 » 04.03.2019 18:58

compalex hat geschrieben:Auf einem i5-6500 [...]
Ist das ein Quad?
Ich würde sonst nur die echten Kerne nutzen.
Gruß, Jens
- - - - - -
Lowend-User und Teilzeit-Cruncher

Bild Bild Bild
Bild

Benutzeravatar
compalex
WU-Schieber
WU-Schieber
Beiträge: 1112
Registriert: 13.12.2016 17:54
Wohnort: Hockenheim

Re: PrimeGrid: Year of the Pig Challenge

#11 Ungelesener Beitrag von compalex » 04.03.2019 21:37

gemini8 hat geschrieben:
compalex hat geschrieben:Auf einem i5-6500 [...]
Ist das ein Quad?
Ich würde sonst nur die echten Kerne nutzen.
Yup, ist ein Quad, bei diesem i5 kann man nur echte Kerne nutzen und von den 4 nutze ich 2-3 je nach System, auf einem Läuft schon ein Programm gern ein Kern verschlingt, so bleibt pro Kiste je ein Kern frei und das reicht um ohne Verzögerungen Email, browsen und unsere Kaufmännische Software laufen zu lassen. Meine i5 die zuhause stehen, dürfen natürlich alle 4 Kerne benutzen.

Bei den Ryzen wird es wieder eine spannende Geschichte, kommen sie diesmal gegen den i5-6500 an? Wenn nicht rechnen sie weiter ATLAS.
Ein i5-6500 schafft in 24Std 4 WU, diese Marke muss der Ryzen toppen, sonst bleibt der race hin oder her draußen ;D ich quelle nicht meine AMD wenn PrimeGrid nicht in der Lage ist nach 2 Jahren die Applikationen an zu passen. Sie müssen natürlich nicht, ich aber auch nicht ;D
Gruß, Alex

Der Schlaue sucht nach einer Lösung, der dumme einen Schuldigen.

#1 Ryzen 3900X + RTX 4070 #2 Ryzen 3900X + GTX 1080
Bild

Benutzeravatar
Michael H.W. Weber
Vereinsvorstand
Vereinsvorstand
Beiträge: 22419
Registriert: 07.01.2002 01:00
Wohnort: Marpurk
Kontaktdaten:

Re: PrimeGrid: Year of the Pig Challenge

#12 Ungelesener Beitrag von Michael H.W. Weber » 05.03.2019 09:23

Der Cluster ist schon umgeschwenkt, ich bin diesmal auch mit mindestens einer Kiste wieder dabei...

Michael.
Fördern, kooperieren und konstruieren statt fordern, konkurrieren und konsumieren.

http://signature.statseb.fr I: Kaputte Seite A
http://signature.statseb.fr II: Kaputte Seite B

Bild Bild Bild

Antworten

Zurück zu „Challenge / Race / Wettkampf“