# of errors

Fehler und Wünsche zum Projekt yoyo@home
Bugs and wishes for the project yoyo@home
Nachricht
Autor
(_KoDAk_)
Mikrocruncher
Mikrocruncher
Beiträge: 17
Registriert: 01.06.2008 23:36
Kontaktdaten:

Re: # of errors

#13 Ungelesener Beitrag von (_KoDAk_) » 28.03.2009 02:58

out_big
Dateianhänge
YOYO_big.rar
(109.06 KiB) 183-mal heruntergeladen
Bild

(_KoDAk_)
Mikrocruncher
Mikrocruncher
Beiträge: 17
Registriert: 01.06.2008 23:36
Kontaktdaten:

Re: # of errors

#14 Ungelesener Beitrag von (_KoDAk_) » 28.03.2009 10:52

it's helps?
Bild

Benutzeravatar
yoyo
Vereinsvorstand
Vereinsvorstand
Beiträge: 8045
Registriert: 17.12.2002 14:09
Wohnort: Berlin
Kontaktdaten:

Re: # of errors

#15 Ungelesener Beitrag von yoyo » 28.03.2009 11:02

Yes, out1 and out2 crashed, out8 was ok.
I wait if some others make also this test.
yoyo
HILF mit im Rechenkraft-WiKi, dies gibts zu tun.
Wiki - FAQ - Verein - Chat

Bild Bild

(_KoDAk_)
Mikrocruncher
Mikrocruncher
Beiträge: 17
Registriert: 01.06.2008 23:36
Kontaktdaten:

Re: # of errors

#16 Ungelesener Beitrag von (_KoDAk_) » 28.03.2009 14:14

test on new comp
Dateianhänge
YOYO_big_new.rar
(109.09 KiB) 186-mal heruntergeladen
Bild


Benutzeravatar
henna
Prozessor-Polier
Prozessor-Polier
Beiträge: 118
Registriert: 15.09.2003 14:18
Wohnort: Mühlenbeck

Re: # of errors

#18 Ungelesener Beitrag von henna » 01.04.2009 12:51

Dateianhänge
yoyo.zip
(1.35 KiB) 197-mal heruntergeladen

Benutzeravatar
yoyo
Vereinsvorstand
Vereinsvorstand
Beiträge: 8045
Registriert: 17.12.2002 14:09
Wohnort: Berlin
Kontaktdaten:

Re: # of errors

#19 Ungelesener Beitrag von yoyo » 01.04.2009 20:26

Hello,
that is a different exit code and a different input number. You should run the test with a different input number and different commandline.
Use this input number and these command lines:

- run it on command line with -v -nn -timestamp -chkpnt checkpnt -inp inp 43000000 > out1
this should confirm, that it crashes
- now run it with -k 2 -v -nn -timestamp -chkpnt checkpnt -inp inp 43000000 > out2
if this also failes
- run it with -k 8 -v -nn -timestamp -chkpnt checkpnt -inp inp 43000000 > out8

yoyo
HILF mit im Rechenkraft-WiKi, dies gibts zu tun.
Wiki - FAQ - Verein - Chat

Bild Bild

Benutzeravatar
henna
Prozessor-Polier
Prozessor-Polier
Beiträge: 118
Registriert: 15.09.2003 14:18
Wohnort: Mühlenbeck

Re: # of errors

#20 Ungelesener Beitrag von henna » 06.04.2009 16:35

new test result:

test 1 crashed
test 2 crashed
test is ok

henna
Dateianhänge
yoyo.zip
(3.29 KiB) 190-mal heruntergeladen

Benutzeravatar
yoyo
Vereinsvorstand
Vereinsvorstand
Beiträge: 8045
Registriert: 17.12.2002 14:09
Wohnort: Berlin
Kontaktdaten:

Re: # of errors

#21 Ungelesener Beitrag von yoyo » 08.04.2009 05:45

Thanks for the test.
yoyo
HILF mit im Rechenkraft-WiKi, dies gibts zu tun.
Wiki - FAQ - Verein - Chat

Bild Bild

Crystal Pellet

Re: # of errors

#22 Ungelesener Beitrag von Crystal Pellet » 10.03.2010 14:56

I had two results with the same exit code 195 (0xc3) this morning:

http://www.rechenkraft.net/yoyo/result. ... id=5889788
http://www.rechenkraft.net/yoyo/result. ... id=5883512

I did the tests 1 and 2, but seem not to crash. Nevertheless the 2 results:


out1:

GMP-ECM 6.2.3 [powered by GMP 4.2.1_MPIR_1.1.1] [ECM]
Input number is 1427112451...2657179643 (58862 digits)
[Wed Mar 10 12:18:42 2010]
Using REDC
Using B1=50000, B2=15446350, polynomial x^2, sigma=964381370
dF=864, k=2, d=8190, d2=11, i0=-4
Expected number of curves to find a factor of n digits:
20 25 30 35 40 45 50 55 60 65
20 204 3115 65277 1739727 5.8e+007 2.3e+009 1.2e+011 5.1e+016 7.2e+021
Step 1 took 2649380ms
Estimated memory usage: 968M
Initializing tables of differences for F took 13993ms
Computing roots of F took 51434ms
Building F from its roots took 52884ms
Computing 1/F took 20015ms
Initializing table of differences for G took 10514ms
Computing roots of G took 51855ms
Building G from its roots took 52245ms
Computing roots of G took 53336ms
Building G from its roots took 53571ms
Computing G * H took 14274ms
Reducing G * H mod F took 21092ms
Computing polyeval(F,G) took 91385ms
Computing product of all F(g_i) took 4696ms
Step 2 took 491434ms
Expected time to find a factor of n digits:
20 25 30 35 40 45 50 55 60 65
17.31h 7.42d 113.26d 6.50y 173.27y 5766y 232812y 1e+007y 5e+012y 7e+017y


out2:

GMP-ECM 6.2.3 [powered by GMP 4.2.1_MPIR_1.1.1] [ECM]
Input number is 1427112451...2657179643 (58862 digits)
[Wed Mar 10 13:24:42 2010]
Using REDC
Using B1=50000, B2=15446350, polynomial x^2, sigma=3077640393
dF=864, k=2, d=8190, d2=11, i0=-4
Expected number of curves to find a factor of n digits:
20 25 30 35 40 45 50 55 60 65
20 204 3115 65277 1739727 5.8e+007 2.3e+009 1.2e+011 5.1e+016 7.2e+021
Step 1 took 2694465ms
Estimated memory usage: 968M
Initializing tables of differences for F took 13041ms
Computing roots of F took 52245ms
Building F from its roots took 52245ms
Computing 1/F took 21824ms
Initializing table of differences for G took 9969ms
Computing roots of G took 53102ms
Building G from its roots took 53244ms
Computing roots of G took 53056ms
Building G from its roots took 51169ms
Computing G * H took 14664ms
Reducing G * H mod F took 19579ms
Computing polyeval(F,G) took 91073ms
Computing product of all F(g_i) took 6287ms
Step 2 took 491653ms
Expected time to find a factor of n digits:
20 25 30 35 40 45 50 55 60 65
17.56h 7.53d 114.89d 6.60y 175.77y 5849y 236169y 1e+007y 5e+012y 7e+017y

If I can do some other tests, just let me know.

Regards,

CP

Antworten

Zurück zu „Fehler, Wünsche / Bugs, Wishes“