Harmonious Trees 0.03

Alles zum Projekt yoyo@home
Everything about the project yoyo@home
Nachricht
Autor
Benutzeravatar
yoyo
Vereinsvorstand
Vereinsvorstand
Beiträge: 8045
Registriert: 17.12.2002 14:09
Wohnort: Berlin
Kontaktdaten:

Re: Harmonious Trees 0.03

#61 Ungelesener Beitrag von yoyo » 05.03.2013 20:27

Can you put this binary to your ARM and this data.txt and start the binary. It should produce the result.txt which is also there.
yoyo
HILF mit im Rechenkraft-WiKi, dies gibts zu tun.
Wiki - FAQ - Verein - Chat

Bild Bild

Benutzeravatar
Augustine
Mikrocruncher
Mikrocruncher
Beiträge: 27
Registriert: 13.08.2007 15:56

Re: Harmonious Trees 0.03

#62 Ungelesener Beitrag von Augustine » 05.03.2013 21:15

As I said, it doesn't support FP in the hardware:

Code: Alles auswählen

$ ./harmtree_0.10_arm-unknown-linux-gnueabihf
Illegal instruction
Bild

Benutzeravatar
yoyo
Vereinsvorstand
Vereinsvorstand
Beiträge: 8045
Registriert: 17.12.2002 14:09
Wohnort: Berlin
Kontaktdaten:

Re: Harmonious Trees 0.03

#63 Ungelesener Beitrag von yoyo » 05.03.2013 21:36

You can compile hat, but you need to compile boinc api and libs before.

Can you please also try dnet:
http://www.rechenkraft.net/yoyo/downloa ... p_dnet.tgz
Just extract and run the wrapper.

yoyo
HILF mit im Rechenkraft-WiKi, dies gibts zu tun.
Wiki - FAQ - Verein - Chat

Bild Bild

Benutzeravatar
Augustine
Mikrocruncher
Mikrocruncher
Beiträge: 27
Registriert: 13.08.2007 15:56

Re: Harmonious Trees 0.03

#64 Ungelesener Beitrag von Augustine » 05.03.2013 22:12

I built HT without HW FP and it's been running for over 40min.

Dnetc ran right out of the box and has been running for a minute.
Bild

Benutzeravatar
Augustine
Mikrocruncher
Mikrocruncher
Beiträge: 27
Registriert: 13.08.2007 15:56

Re: Harmonious Trees 0.03

#65 Ungelesener Beitrag von Augustine » 06.03.2013 23:53

Augustine hat geschrieben:Dnet ran right out of the box and has been running for a minute.
Dnet has finished its work after 23h on the ARMv5. The resulting files can be found at http://dl.dropbox.com/u/4102834/dnet.tgz.

Perhaps it could be added for automatic download by arm-unknown-linux-gnueabi hosts, couldn't it? Then, please, enable this platform in the server.

TIA
Bild

Benutzeravatar
Augustine
Mikrocruncher
Mikrocruncher
Beiträge: 27
Registriert: 13.08.2007 15:56

Re: Harmonious Trees 0.03

#66 Ungelesener Beitrag von Augustine » 07.03.2013 16:58

Augustine hat geschrieben:I built HT without HW FP and it's been running for over 40min.
HT ran for 32h, but its result.txt is different from the one there: http://dl.dropbox.com/u/4102834/hat.tgz

Please, advise.
Bild

Benutzeravatar
yoyo
Vereinsvorstand
Vereinsvorstand
Beiträge: 8045
Registriert: 17.12.2002 14:09
Wohnort: Berlin
Kontaktdaten:

Re: Harmonious Trees 0.03

#67 Ungelesener Beitrag von yoyo » 07.03.2013 19:39

Augustine hat geschrieben:
Augustine hat geschrieben:Dnet ran right out of the box and has been running for a minute.
Dnet has finished its work after 23h on the ARMv5. The resulting files can be found at http://dl.dropbox.com/u/4102834/dnet.tgz.

Perhaps it could be added for automatic download by arm-unknown-linux-gnueabi hosts, couldn't it? Then, please, enable this platform in the server.

TIA
I added a cruncher app for arm-unknown-linux-gnueabi.
yoyo
HILF mit im Rechenkraft-WiKi, dies gibts zu tun.
Wiki - FAQ - Verein - Chat

Bild Bild

Benutzeravatar
yoyo
Vereinsvorstand
Vereinsvorstand
Beiträge: 8045
Registriert: 17.12.2002 14:09
Wohnort: Berlin
Kontaktdaten:

Re: Harmonious Trees 0.03

#68 Ungelesener Beitrag von yoyo » 07.03.2013 19:41

Augustine hat geschrieben:
Augustine hat geschrieben:I built HT without HW FP and it's been running for over 40min.
HT ran for 32h, but its result.txt is different from the one there: http://dl.dropbox.com/u/4102834/hat.tgz

Please, advise.
Can you create the assembler code from the source (gcc -S)?

yoyo
HILF mit im Rechenkraft-WiKi, dies gibts zu tun.
Wiki - FAQ - Verein - Chat

Bild Bild

Benutzeravatar
Augustine
Mikrocruncher
Mikrocruncher
Beiträge: 27
Registriert: 13.08.2007 15:56

Re: Harmonious Trees 0.03

#69 Ungelesener Beitrag von Augustine » 07.03.2013 22:28

yoyo hat geschrieben:I added a cruncher app for arm-unknown-linux-gnueabi.
Thanks, but the first WU failed: http://bit.ly/10do413. :(
Bild

Benutzeravatar
Augustine
Mikrocruncher
Mikrocruncher
Beiträge: 27
Registriert: 13.08.2007 15:56

Re: Harmonious Trees 0.03

#70 Ungelesener Beitrag von Augustine » 07.03.2013 22:36

yoyo hat geschrieben:Can you create the assembler code from the source (gcc -S)?
Here it is: http://db.tt/LZYkojiP.

Thanks.
Bild

Benutzeravatar
yoyo
Vereinsvorstand
Vereinsvorstand
Beiträge: 8045
Registriert: 17.12.2002 14:09
Wohnort: Berlin
Kontaktdaten:

Re: Harmonious Trees 0.03

#71 Ungelesener Beitrag von yoyo » 07.03.2013 22:41

Augustine hat geschrieben:
yoyo hat geschrieben:I added a cruncher app for arm-unknown-linux-gnueabi.
Thanks, but the first WU failed: http://bit.ly/10do413. :(
Seems that boinc could not start the wrapper:
<core_client_version>7.1.0</core_client_version>
<![CDATA[
<message>
process exited with code 2 (0x2, -254)
</message>
<stderr_txt>
sched_setscheduler: Operation not permitted
execv: No such file or directory

</stderr_txt>
]]>
Any firewall, antivirus which blocks the download of the wrapper?

yoyo
HILF mit im Rechenkraft-WiKi, dies gibts zu tun.
Wiki - FAQ - Verein - Chat

Bild Bild

Benutzeravatar
Augustine
Mikrocruncher
Mikrocruncher
Beiträge: 27
Registriert: 13.08.2007 15:56

Re: Harmonious Trees 0.03

#72 Ungelesener Beitrag von Augustine » 07.03.2013 22:53

yoyo hat geschrieben: Any firewall, antivirus which blocks the download of the wrapper?
No, but I'm intrigued by this error message about sched_setscheduler().. I don't run BOINC as root, which would be the only one who could raise its own priority, I suppose.

Here's what I see in the directory:

Code: Alles auswählen

$ ls /var/lib/boinc-client/projects/www.rechenkraft.net_yoyo
default_stat_icon_01.png              rkn_01.png
dnetc519-linux-arm-eabi               slideshow_00
ecm_01.png                            slideshow_01
evo_01.png                            slideshow_02
job_0.01_arm-unknown-linux-gnueabihf  slideshow_03
muon_01.png                           slideshow_04
ogr_01.png                            stat_icon
ogr_130307095037_20-in.og2            wrapper_519.02_arm-unknown-linux-gnueabi
Bild

Antworten

Zurück zu „Number crunching“