Muon 1.10 - stucks at 33% for two hours!
Muon 1.10 - stucks at 33% for two hours!
Hi... This is not the first time this happens with yoyo@home. In fact, I suspended it, but decided to give it another try now.
I've got this Muon WU. Started ok, reached 33%, went suspended. Now, it's active again, but the progress is still 33% after two hours uninterrupted! (running with high priority). Also, time to completion is increasing accordingly every second.
Is there a problem with this application?
Regards,
Leo
I've got this Muon WU. Started ok, reached 33%, went suspended. Now, it's active again, but the progress is still 33% after two hours uninterrupted! (running with high priority). Also, time to completion is increasing accordingly every second.
Is there a problem with this application?
Regards,
Leo
Re: Muon 1.10 - stucks at 33% for two hours!
This is quite normal.
It can lead up to 5h I would guess.
Everything is ok, if the muon process still consumes cpu time in taskmanager (assuming you are running Windows).
yoyo
It can lead up to 5h I would guess.
Everything is ok, if the muon process still consumes cpu time in taskmanager (assuming you are running Windows).
yoyo
- Uwe Sänger Herzke
- Block-Bunkerer
- Beiträge: 1326
- Registriert: 31.05.2006 14:33
- Wohnort: Bremen
- Kontaktdaten:
Re: Muon 1.10 - stucks at 33% for two hours!
Muon doesn't have a real progress bar, it goes up in 33.33% steps.
Look in the Wiki
Look in the Wiki
Progress indicator will be increased every 33.3%. If a simulation produces a very good result it will rerun 4 times to verify it. In this case the progress indicator increases by 6.6%.
Re: Muon 1.10 - stucks at 33% for two hours!
Ok... too bad... now, why does the column "To Completion" increases along with the "Elapsed" time? This seems likes a joke, a neverending task. Even with the progress bar in "steps" of 1/3, the time "To completion" should be fixed (or at least, not change every second!)
Regards,
Leo
Regards,
Leo
Re: Muon 1.10 - stucks at 33% for two hours!
when the you get to 66% the time to complete should be fixed.
Re: Muon 1.10 - stucks at 33% for two hours!
Thanks everybody for the answers! Hope there will be a version much less confusing soon...
Regards,
Leo
Regards,
Leo
Re: Muon 1.10 - stucks at 33% for two hours!
The "to completion" time can't be influenzed by us. This time is calculated by Boinc, not by our application. Our application just say 33% completed, thats it.llagos hat geschrieben:Ok... too bad... now, why does the column "To Completion" increases along with the "Elapsed" time? This seems likes a joke, a neverending task. Even with the progress bar in "steps" of 1/3, the time "To completion" should be fixed (or at least, not change every second!)
Regards,
Leo
yoyo
Re: Muon 1.10 - stucks at 33% for two hours!
just to notify... I modified preferences to run just evoltution@home. Downloaded one task... after some running time, it came back to 0... started again... downloaded a second task... first task ran a few hours each day... today it was back to 1%, and the second still at zero...
sorry, but I'm suspending this project, until a new update. Better to donate my cpu time to some less random project.
Regards,
Leo
sorry, but I'm suspending this project, until a new update. Better to donate my cpu time to some less random project.
Regards,
Leo
Re: Muon 1.10 - stucks at 33% for two hours!
Evolution@home has no checkpointing.
If you restart you computer or the wu get paused for an other reason the wu has to start from the beginning.
If you restart you computer or the wu get paused for an other reason the wu has to start from the beginning.
Re: Muon 1.10 - stucks at 33% for two hours!
what!? well.. that explains it all.... this reminds me of a nice-to-have feature asked on the boinc manager, like "run until finish", when using dual core machines... one core for switching tasks, the other one for tasks with these kind of features, or your "favourites/priority" tasks...
Case closed, I guess... (until the dev of boinc manager realize this)
Thanks for the reply.
Leo
Case closed, I guess... (until the dev of boinc manager realize this)
Thanks for the reply.
Leo
Re: Muon 1.10 - stucks at 33% for two hours!
Hi. I just wanted to check if checkpoint is now available for yoyo?
thanks,
thanks,
Re: Muon 1.10 - stucks at 33% for two hours!
muon1 has checkpointing every 5min or the time you set in your boinc manager for writing to disc every n minutesllagos hat geschrieben:Hi. I just wanted to check if checkpoint is now available for yoyo?
thanks,