Hallo
Ich habe mich bei Atlas@home mal angemeldet.
Jetzt kommt immer wieder die Meldung.
Verschoben: VM Hypervisor failed to enter an online state in timely fashion.
Was bedeutet das und was muss ich machen, dass die WUs die alle bei 99.90 % stehen fertig gerechnet und upgeloaded werden.
Gruss Bommer
Was bedeutet das bei ATLAS@home ?
Re: Was bedeutet das bei ATLAS@home ?
Hatte ich neulich auch. Da kannte ich das folgende noch nicht, von daher weiß ich nicht ob es funktioniert.
Zu Atlas und dem Hypervisor-Problem:
Ich werde demnächst noch mal einen Anlauf bei Atlas unternehmen und falls das Problem noch einmal auftritt folgendes probieren:
1. Shut down boinc manager. (You can use "shut down connected client" method if you have some jobs that are still running OK. This will hopefully get them closed down more smoothly.)
2. Open VirtualBox Manager. You may see various states such as "Shutdown", "Aborted", etc. Try this method on any that are there, they all started working again for me.
3. Click on each virtual machine and hit the "Start" arrow.
4. Allow the virtual machine to boot and get into a state where it seems to be running.
5. In each virtual machine's window pull down the "Machine" menu and select "ACPI Shutdown"
6. Wait for VMs to shutdown.
7. Open boinc manager. The tasks should start up and run fine now.
Zu Atlas und dem Hypervisor-Problem:
Ich werde demnächst noch mal einen Anlauf bei Atlas unternehmen und falls das Problem noch einmal auftritt folgendes probieren:
1. Shut down boinc manager. (You can use "shut down connected client" method if you have some jobs that are still running OK. This will hopefully get them closed down more smoothly.)
2. Open VirtualBox Manager. You may see various states such as "Shutdown", "Aborted", etc. Try this method on any that are there, they all started working again for me.
3. Click on each virtual machine and hit the "Start" arrow.
4. Allow the virtual machine to boot and get into a state where it seems to be running.
5. In each virtual machine's window pull down the "Machine" menu and select "ACPI Shutdown"
6. Wait for VMs to shutdown.
7. Open boinc manager. The tasks should start up and run fine now.